Add a Leak Detector on iOS


Adding a Leak Detector

You can add a Leak Detector to a Location at any time. It will be paired to ALL Valve Controllers also in the Location.

  1. From the "Home" screen, scroll to find the desired Location
  2. Tap on the Location
  3. Tap the “+” button
  4. Select “Leak Detector”
  5. Click “Continue”
  6. Scan the QR code (located on the bottom side of your Leak Detector)
  7. Click “OK”
  8. Done!
1 out of 1 found this helpful



Article is closed for comments.