If your Valve Controller has been successfully added to the app, resetting it will remove it from your location and unpair your leak detectors.
To factory reset your Valve Controller, please press and hold the button on top of the Valve Controller until you hear a total of 5 beeps. Each beep will be 2 seconds apart.
Once you let go of the button, your Controller's top LEDs will flash momentarily and then settle on 1 solid Power LED. Your WIFI LED may or not be on (refer to article on Valve Controller LED behavior for more details.)
After factory reset, please power cycle your Valve Controller – To power cycle, please unplug and plug back in the Guardian's power supply, while the battery backup is removed (if you have one.)
Comments
Article is closed for comments.